I was booting off of the blank hard drive. I have a Dell Optiplex GX280 Smsll Desktop. Thanks a bunch, I wouldn't of been able to figure that out if it wasn't you. Now that I think about it, I need some more USB slots. this content
Get the answer Saga LoutFeb 25, 2012, 1:04 AM Try the CD again and go past the Repair or Install stage, accept the EULA terms by pressing Function 8 and you Other then that, most cards will be fine (as long as they support your operating system) You can have a look at the specs here May 28, 2009 #11 lechevarria89 This is usually caused by disk write errors, virus attacks or power outages. In most cases, the boot problems occur because the system tries to boot from the wrong boot device. https://www.cnet.com/forums/discussions/upon-boot-up-i-receive-a-message-disk-error-press-any-key-350035/
Symptom 1: "Disk Boot Failure" error screen on startup Every time a computer is turned on, as part of the boot process the BIOS tries to find a bootable drive to Still have hardware warranty and Dell phone support for 1st year. You could take a look at how the inside of my computer looks here: http://www.dell.com/html/us/products/optiplex/GX280sd_3d_model.html Just click on Internal.
Step 7: Change Active Partition (With your “Recovery Media” placed on the CD/DVD drive boot to “Command Prompt”). 1. Disk Error Press Any Key To Restart Usb Boot Now let the “Startup Repair” to check your computer for problems. May have to put my thinking cap on if you run into any troubles Then I can get back to you when my head isnt full of riesling May 28, http://www.techspot.com/community/topics/disk-error-press-any-key-to-restart.128192/ Cause 2: Faulty data cables Like all components of our PC’s, hard drive data cables tend to deteriorate as the time passes.
That's because the card driver installed in Windows doesn't kick in at that point, only after Windows starts. Disk Error Windows 7 Inside Bios menu, find “Boot Order” setting. They sell them on ebay for under $20 depending on with type you get. So, I decided to disconnect the adapter from the USB port and restart my computer.
Just double check the height of your graphics card compared to the PCI slots, make sure they arent the same height. https://www.raymond.cc/blog/help-a-disk-read-error-occurred-press-ctrlaltdelete-to-restart/ This post has been flagged and will be reviewed by our staff. Disk Error Press Any Key To Restart Xp DO you have a Windows CD or DVD that came with the computer or a recovery set you made since?Post back with some details of the operating system - XP, Vista, How To Fix Disk Read Error I tried my CD drive a few weeks ago while set to master but still had the same problem.
Track this discussion and email me when there are updates If you're asking for technical help, please be sure to include all your system info, including operating system, model number, and news I cannot even get into windows in the first place. I checked my graphics card; the PCI slots seem to have enough room to fit a regular height card. Jun 21, 2009 #23 lechevarria89 TS Rookie Topic Starter Posts: 43 Yeah, that makes sense. Disk Error Press Any Key To Restart Windows 8
Place the “Recovery Media” (Windows 7 Installation DVD or the System Repair Disk) on your CD/DVD drive. 2. Enter the BIOS settings by pressing “DEL” or “F1” or “F2” or “F10”. * * The way to enter into BIOS Settings depends on the computer manufacturer. 2. To answer your second question, since both of my HDD's are SATA they don't come with a jumper, so I can't set them to anything. http://winhq.net/disk-error/disk-error-press-any-key-to-restart-win-7.html Step 6: Fix (ReBuild) the corrupted Boot Configuration Data (BCD) folder. 1.
I think I might of tried that before when I had the optical drive connected directly into the motherboard. Remove Disks Or Other Media Press Any Key To Restart Contents1 About "Disk Boot Failure"1.1 Description and Symptoms1.2 Symptom 1: "Disk Boot Failure" error screen on startup2 Causes of this Error2.1 Cause 1: Incorrect BIOS boot order2.2 Cause 2: Faulty data cables2.3 Cause Read http://forums.cnet.com/5208-7588_102-0.html?messageID=3080838&tag=forums06;posts#3080838 and use that method to see if your hard disk can be read.
Thanks Bob. Restart the computer. Insert the Windows XP CD in the disc tray and boot from it Press R to access Recovery Console At Command Prompt, type the bootcfg command: bootcfg /rebuild Press Enter When Non System Disk Or Disk Error Set it to master, make it the first boot device and try to boot it with the Windows CD in it.
That way you can bypass the slot on the motherboard, as that may be faulty. This is usually any of the following keys: F2, F8, F12, Esc or Del. Choose the Windows installation to be repaired, and type in the Administrator password followed by the Enter key to submit it. check my blog To test if your hard disk is failing or it's already failed, use Easy Recovery Essentials' Automated Repair.
It's available for Windows 8, Windows 7 and Windows Vista. if so, probably Not applicable. Flag Permalink This was helpful (0) Back to Windows Vista forum 14 total posts Popular Forums icon Computer Help 51,912 discussions icon Computer Newbies 10,498 discussions icon Laptops 20,411 discussions icon I have reached the end of my own knowledge on the subject, can anyone please give me some information on what to do?
If XP is installed Boot off the XP CD and get to the Recovery Console and type chkdsk /R and hit enter. Press CTRL+ALT+DEL to restart Oct 13, 2005 No Boot Device available - insert boot disk and press any key Aug 10, 2009 No bootable device - insert boot disk and press I made the Ubuntu OS boot disk as suggested in that post cited above and was successful with booting the laptop with ubuntu and can see all the folders on my Flag Permalink This was helpful (0) Collapse - What to save?
You can download Easy Recovery Essentials from here. Your data and installed programmes will survive but things might need reorganising a little. On starting my old pc it states Disk error, press any key to restart.